How to add cigarette oil to electronic cigarettes?

The electronic cigarette is generally composed of filter tip, atomizer and battery rod. The smoke oil is stored in the atomization silo. The atomizer also contains an oil storage bin and an atomization core.

It is recommended to wear gloves to prevent tobacco oil from touching your hands, and then unscrew the cap of the tobacco oil bottle. If you feel that the outlet of the oil bottle is small, you can use scissors to cut it large.

Step 1: unscrew the electronic smog core base and atomizer

Step 2: use a pinhole bottle to add smoke oil along the side wall of the atomizer. The amount of smoke oil added shall not exceed 2/3 of the atomization chamber, and shall not exceed 2ml

Step 3: tighten the atomizing core, and the smoke oil is added successfully

Note: do not add smoke oil from the suction hole in the middle of the atomizer, otherwise the smoke rod will be burnt out. If you are a first-time user of electronic cigarettes, it is recommended to smoke from low concentration of cigarette oil and a small amount.

After adding oil, do not use it immediately. Let the smoke oil fully saturate the atomization chamber, and wait about 1 minute for better effect.

How much oil is added to the electronic cigarette?

The amount of oil added to the e-cigarette atomizer generally depends on the amount of cigarettes you smoke. 1ml or so is almost equivalent to the amount of a pack of cigarettes. If you use large smoke, it may cost more oil. Of course, don't add too little. Some atomizers have oil guide ropes. It is necessary to immerse the oil guide ropes with smoke oil, otherwise it is easy to dry burn and damage the atomizer.