What about electronic cigarette paste core?

In addition to the problems of oil leakage, jump resistance, oil explosion, etc., smoking electronic cigarettes may also encounter core sticking. We all know that the newly made core needs to be moistened with tobacco oil before use, so that cotton can absorb enough tobacco oil. Direct dry burning of cotton will certainly paste the core, and cotton may also lead to carbon deposition in the heating wire under high temperature; In this way, not only the cotton needs to be re threaded, but also the coil has to be re wound. It is very troublesome. What should we do with the electronic cigarette paste core? Xiaobian teaches you to solve the problem from the following six aspects.

1、 Select the cigarette oil

Vg/pg value of bituminous oil is also an important factor leading to core paste. VG is glycerin and its fluidity is worse than PG; Therefore, the smoke oil with high VG content will lead to the decrease of oil transmission speed. If the atomization speed is greater than the oil transmission speed, dry burning will occur, which will lead to core paste. In addition, the taste of Malay oil is generally sweet, which is the reason for its high sugar content; High sugar content is prone to carbon deposition, which leads to paste core. Therefore, to avoid the paste core caused by the smoke oil problem, it is necessary to select the smoke oil with a higher VG content or reduce the use frequency. Of course, cold weather will also lead to poor fluidity of tobacco oil, especially peppermint flavored tobacco oil, which leads to paste core; Therefore, it is said that players in the North need to "influence" the smoke oil with their love for vape before using it.

2、 Power

When the power is high, the corresponding atomization speed will be increased, and the oil guide speed will not change. Sorry, the core will still be pasted. This situation can be solved by reducing the power. However, when the power is constant, the occurrence of jump resistance may also lead to core burn, which is related to the player's proficiency in DIY. At the same time, when DIY is used to make wire, the coil is not handled perfectly, or the coil is deformed by wearing cotton, which will lead to uneven heating and core paste.

3、 Usage time

The atomizing core also has a long service life. If it is used too long, many "health" problems will occur, such as carbon deposition. Carbon deposition is generally a black substance attached to the heating wire, which will directly affect the taste; It will also further lead to the occurrence of core sticking. Generally, the heating wire needs to be made again if carbon deposits are generated.

4、 Atomizing core

The vast majority of paste cores are not caused by tobacco oil. Poor oil transmission of cotton, high viscosity of tobacco oil and uneven heating can be avoided during normal use. Pay more attention to the changes of atomizing core, and your DIY proficiency will naturally improve.

5、 Atomizing core moistening core

Before using the finished atomizing core, the atomizing core shall be moistened, and the tobacco oil shall be dripped repeatedly three times at the top and around the place where the cotton can be seen. After the atomizer is filled with tobacco oil and installed, it shall be kept still for about 15 minutes, so that the cotton can fully absorb the tobacco oil, so as to prevent the core from sticking.

6、 Uneven heating

Uneven heating means that one or two of the heating coils are heated very fast, which makes it easier to paste the core. The heating coil shall be burned once it is made, so as to ensure uniform heating.